1 / 3
RaceFace bottom bracket bearing remover, BSA 30 threaded — image 1
1 / 3

RaceFace bottom bracket bearing remover, BSA 30 threaded

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two printed parts to remove bearing from cup. Bearing cup must be removed from bike.

Rating
0 / 5
Likes
13
Downloads
47
Makes
0
Views
506
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I developed this tool for removing the bearings of a Raceface BSA 30 threaded bottom bracket.
There is only 1 mm of the inner race of the bearing available to push it out, so I opted to remove the cups out of the frame so that I can use the full circumference to press the bearing out of the cup.

The sleeve uses the notches in the bearing cups to position it properly.

I used the Wheels Mfg rod (12 mm) and handle, but any threaded rod (12, 10 or 8 mm) with nuts and washers can be used. 

I used PLA for all the parts.
To ensure they are strong enough, I set the perimeters of the vertical shells at 12, the solid layers of the horizontal shells at 8 and the infill at 60%, cubic, so the parts are almost solid.
A metal washer can be used between sleeve and handle if necessary.

Tags