1 / 1
LTC1871 DC-DC Booster Converter Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
protective case for boost converter
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 44
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I wanted a case for this boost converter: https://a.co/d/hFepbhh
Didn't find one, so I made one.
Very simple, <30 minute print on Bambu X1C printed in PLA.
I used 0.2mm layer height, 10% gyroid infill, 2 walls; but I'm sure any normal settings would also work fine.
M3x6mm (4 or 5mm would work too) screws self thread into the holes to secure it in place.
I will upload a proper picture when I have the chance; the first one printed was immediately used in a project :)