Filament Spool bearing for Large Rolls
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of a remix to make it work for large spools 3kg etc. and with M8 rods
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of a remix to make it work for large spools 3kg etc. There is one file if you want to have an M8 Rod in the middle and one if you use the standard prusa holder. With the standard prusa holder you will have a problem that they are too long for it, so this needs to be solved. The default prusa spool holder has a hard time with 3kg rolls anyhow. This is why i would recommend going with an M8 rod in the middle instead.
Prints fine with 0.3, requires no support. After print it would be good to loosen the pins and add a bit of oil.
Would recommend attaching the M8 rod to a drill and just screwing it in
Goes well together with this:
https://www.printables.com/model/729970-roof-filament-spool-holder-m8-rod