Pifinder Bottom / Mount to Hadley
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement for the PiFinder Case V2 Bottom that will attach to the 1/2 inch Rods of a Hadley telescope.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 1
- Views
- 416
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a merge of two parts, the part “Bottom” of BBLab's PiFinder, and the part “Test_Print” from Maff's Hadley Telescope. Print time on this part is just a bit longer than BBLab's Bottom. It will eliminate the need to print the dovetail mounting hardware and figure out how to get a dovetail on your Hadley, AND reduce the need for four heat stake inserts and related cap screws.
BBLabs noted that folks might need a left or right hand version. If this is oriented wrong for your configuration you can fix it in your slicer by doing a Mirror around the X Axis.