1 / 1
Creality K1 Filament Sensor Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moves the filament sensor up and tangels it to the side so it can be fed from the side with a stand or dryer
- Rating
- 4.833 / 5
- Likes
- 128
- Downloads
- 891
- Makes
- 8
- Views
- 4,009
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You need 2 additional M3x5 or M3x8 Screws to mount the holder in place where the sensor used to be.
This mod moves the filament sensor to the top and tilts the opening to the side.
The intention was to allow filament to be fed from the side, in my use case from a slightly hightend shelf and a filament dryer when the original didnt give me enough clearance.
The attached project file is fully parametric if you want to put it up even further or down a bit.