NinoTNC - Mode and Band Tag
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reusable tags for standard NinoTNC case to identify mode and band.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 1
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Work In Progress - more options available soon.
When you have many NinoTNCs they can be tuned for different baud rates and work on different bands. Tags help to identify baud rate, mode, and band. They are to be used with standard NinoTNc case in this link
https://www.printables.com/model/562738-nino-tnc-a4-case
https://www.printables.com/model/288268-ninotnc-a4-housing
- Mode tag fits by pushing into the MODE dip-switch square hole.
- Band tag fits by pushing into the SIGNALS dip-switch square hole.
Mode and Signals squares are different size. Prototypes were printed on Ender 3 V2 with Sunlu PLA+. I print them on glass, numbers facing down.
NOTE: Some scaling might be required as everyone has different tolerances. If it is too tight and does not fit, scale it down tiny bit. If it's too loose scale, and tag falls out, it up tiny bit.
Printing with numbers facing up. Remember about elephant foot and enable ironing for nice finish.
If mode or band is missing, please let me know in the comments.