Office Chair Chock for Sim Racing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wheel chock designed to fit standard 50mm office chair wheels.
- Rating
- 5 / 5
- Likes
- 140
- Downloads
- 835
- Makes
- 10
- Views
- 2,523
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I designed these wheel chocks after trying to use racing sims with a wheeled office chair, this proved problematic as the chair would move when putting pressure on the pedals.
I designed these chocks to fit standard 50mm wheels. They use a centre “divider” in order that the wheel does not slip off during use. These chocks work well however can be improved by gluing rubber/foam to the bottom, I personally used some cut-offs from an old bike inner tube which works very well.
After printing these chocks I no longer had the problem of the chair slipping around.
You could print one chock for every wheel however this is unnecessary and 2 will suffice.
It is important that the infill is at least 50%, this is to give it the strength needed.