1 / 1
FRC NI RoboRio minimal mounting clips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FRC NI RoboRio minimal mounting clips. Allows bolting down the RoboRio via its zip tie mounting holes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 54
- Makes
- 0
- Views
- 413
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Minimal mounting clip system for the NI RoboRio used in FRC. Clips are designed to use standard #6 or 6-32 machine screws. Clips insert into the side zip tie holes on the RoboRio. The slots are set up such that you can loosen the screws on 2 clips, slide them back, and remove the RoboRio.
Printing info:
- Recommend using PETG.
- 15% infill
- 2 perimeters
I printed mine with a “side” down and used support all to support the slot. Had no issues popping the support out of the slot.
Original FreeCad design files and a step file export are included.