1 / 1
Neptune4 AntiVibration Feet (slim)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Version is about 9.5mm high.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 133
- Makes
- 2
- Views
- 846
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The effectivness can be slightly enhanced by turning 2 of the 4 feet by 90° when placed under the original rubber feet. That way especially the Y-Axis motion is dampened slightly better. This type of design printed in PETg or PLA is still rigid enough to keep a cabinet moving. Only the high pitch resonance frequencies are decoupled from the Surface the printer is on.
i did print it in PETg/colorfabb nGen. 0.5 Layer width which results in exactly 2 lines for the arcs. Infill can be reduced to a minimum. You could even remove top and bottom surfaces if you like the open look