Tina2 Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little filament guide for the Tina2. Letting the filament go vertically into the extruder prevents it from slipping.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 324
- Makes
- 1
- Views
- 1,096
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Tina2 Filament Guide
If, like me, you have a Tina2, but you're using a 1kg filament spool, then you have an external spool holder, or an extension of the original one.
In this situation I noticed that the extruder sometimes struggles to pull the filament, due to the angle the filament has. This would sometimes result in under-extrusion as well. With this little add-on, I was able to solve the problem, forcing the filament to enter the extruder from below, and not from behind.
Print Settings
Material: PLA
Layers: 0.2 mm
Raft: No
Support: yes (to be safe, maybe you can actually print it without any)
Infill: 30%
Walls: 4
After Print
I used double-sided tape to stick it to the side of the printer, just under the extruder.
I sanded a bit the inner part of the ring after removing supports to reduce friction. To reduce it even more i put a bit of tape on the inside of the ring. The tape helps as it's smooth, but it's not really necessary in my opinion.