Tina2 Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little filament guide for the Tina2. Letting the filament go vertically into the extruder prevents it from slipping.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 324
- Wydruki
- 1
- Wyświetlenia
- 1096
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Tina2 Filament Guide
If, like me, you have a Tina2, but you're using a 1kg filament spool, then you have an external spool holder, or an extension of the original one.
In this situation I noticed that the extruder sometimes struggles to pull the filament, due to the angle the filament has. This would sometimes result in under-extrusion as well. With this little add-on, I was able to solve the problem, forcing the filament to enter the extruder from below, and not from behind.
Print Settings
Material: PLA
Layers: 0.2 mm
Raft: No
Support: yes (to be safe, maybe you can actually print it without any)
Infill: 30%
Walls: 4
After Print
I used double-sided tape to stick it to the side of the printer, just under the extruder.
I sanded a bit the inner part of the ring after removing supports to reduce friction. To reduce it even more i put a bit of tape on the inside of the ring. The tape helps as it's smooth, but it's not really necessary in my opinion.