Nursery Pot Liner for IKEA plant pot BINTJE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small flower pot with better drain holes to fit into my small IKEA plant pot.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 107
- Makes
- 0
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I printed this on a Prusa MK3 at 0.24mm layer height (0.20 initial layer) in PLA. Generate support up to the base of the pot only by either using a support blocker above 5mm or setting the support overhang angle to 85 degrees.
The included photo is a prototype of the model. The second photo is the nursery pot I used before.
Since printing, I made the top rim sturdier and added a center drain hole. Volume is roughly one pint or 500 mL.
STEP and SLDPRT files are included if you want to modify the design.
Link to the IKEA pot: https://www.ikea.com/us/en/p/bintje-plant-pot-galvanized-10341485/