1 / 2
Nursery Pot Liner for IKEA plant pot BINTJE — zdjęcie 1
1 / 2

Nursery Pot Liner for IKEA plant pot BINTJE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small flower pot with better drain holes to fit into my small IKEA plant pot.

Ocena
0 / 5
Polubienia
8
Pobrania
107
Wydruki
0
Wyświetlenia
459
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I printed this on a Prusa MK3 at 0.24mm layer height (0.20 initial layer) in PLA. Generate support up to the base of the pot only by either using a support blocker above 5mm or setting the support overhang angle to 85 degrees. 

The included photo is a prototype of the model. The second photo is the nursery pot I used before. 

Since printing, I made the top rim sturdier and added a center drain hole. Volume is roughly one pint or 500 mL. 

STEP and SLDPRT files are included if you want to modify the design. 

Link to the IKEA pot: https://www.ikea.com/us/en/p/bintje-plant-pot-galvanized-10341485/ 

Tagi