1 / 5
Creality K1 / K1 MAX PTFE tube holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Creality K1 / K1 MAX PTFE tube holder
- Rating
- 4.5 / 5
- Likes
- 144
- Downloads
- 1,700
- Makes
- 5
- Views
- 5,045
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Unfortunately, the original clips catch on other elements during operation.
I tried many other designs, but something was always wrong. The hole for the tube or chain clip is too tight.
I designed my own version and after quite a long test I can say that in my opinion it works very well.
I printed PLA with a nozzle 0.4, layer 0.2, but during printing ABS with a closed chamber they were deformed. Finally, I printed it from ABS and after a few prints, the closed chamber is still intact.
Additionally, I added a few other shapes so that everyone could adapt to their own needs.
