1 / 5
Creality K1 / K1 MAX PTFE tube holder — zdjęcie 1
1 / 5

Creality K1 / K1 MAX PTFE tube holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Creality K1 / K1 MAX PTFE tube holder

Ocena
4,5 / 5
Polubienia
144
Pobrania
1708
Wydruki
5
Wyświetlenia
5060
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Unfortunately, the original clips catch on other elements during operation.

I tried many other designs, but something was always wrong. The hole for the tube or chain clip is too tight.

I designed my own version and after quite a long test I can say that in my opinion it works very well.

I printed PLA with a nozzle 0.4, layer 0.2, but during printing ABS with a closed chamber they were deformed. Finally, I printed it from ABS and after a few prints, the closed chamber is still intact.

Additionally, I added a few other shapes so that everyone could adapt to their own needs.

Tagi