1 / 3
Filament Spool Adapter (to stop rocking) with Stopper, for CR10-SE to stop spool from sliding off
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original Adapter, plus End Stop Ring, to keep spool from drifting off. This was needed on my CR10-SE
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 123
- Makes
- 0
- Views
- 885
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
End-Stop ring, to keep the spool on the adapter. (Pic 3, is what happened without it)
Print the adapter upright, with NO SUPPORTS. (also, the ring, of course).
I printed in PLA on a CR10-SE, and PET-G on a P1S. Both work fine.
I used 3 walls, 15% infill.