Interactive Clock Back Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Build the clock from this Instructables post:https://www.instructables.com/id/INTERACTIVE-INTERNET-CLOCK/ The design…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Build the clock from this Instructables post:
https://www.instructables.com/id/INTERACTIVE-INTERNET-CLOCK/
The design had a backing plate cut from plastic so I designed my own that could be 3D printed. Included is spacers and washers that the machine screws go through to secure the plate to the RGB LED matrix.
I have included the Fusion 360 archive file if you want to make a remix, etc.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
0.2mm
Infill:
15%
Filament:
Inland PLA+ White
Notes:
I used a brim when printing the spacers and washers.
Category: Electronics