1 / 7
Easy-Install Gopro Scuba Mask Mount with recessed nut and support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of jayziggy's awesome original model. I made the following modifications: Scaled the original to .001…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 83
- Makes
- 0
- Views
- 625
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
This is a remix of jayziggy's awesome original model. I made the following modifications:
- Scaled the original to .001 in Netfabb so that the object would seem to be in mm units rather than µm.
- MeshMixer was then used to add some breakaway supports so that the ends of the strap clip would print better on my single-extruder printer.
- While in Meshmixer it seemed worthwhile to adjust the mount point to add a space for a loosely-captive nut. I found it difficult to get right the size or the cavity for the nut within that application, and instead went for a loose cavity with little protrusions around the edges to hold the nut in place.
- While still in Meshmixer, adjusted the spacing and thickness of the fins of the gopro mount. The fact that I needed to do this may indicate that I need to recalibrate my printer --but I needed a little more negative space within the mount for the fins of my gopro's mount, in the print of the original I couldn't get the gopro mount to insert far enough to fit the mounting screw.
A timelapse of a print can be found at: https://vimeo.com/96028830
Edit 08/14/14 -- by request, I've added an STL file that's sans support (all save 1 that I couldn't easily remove). I've also added the Meshmixer files for the original and sans-support version.
Edit 08/15/15 -- added greycat001's optimized and supportless version, named "GP_ScubaMount_v2.3_nosupport fixed.stl"
Category: Sport & Outdoors