Creality T8 Leadscrew Nut Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts a Creality style 2-screw leadscrew nut to 4-screw style nut
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
If you have a mix of Creality and other printers, you might end up needing different type of T8 leadscrew nuts to cover them all. This is a very simple adapter that adapts a Creality style 2-screw trapezoidal nut into the commonly found 4-screw round nut so you only need to buy and maintain one type. This is specifically made for POM nuts like the ones in this link, but should work for nuts with a 10mm shaft OD.
BOM:
-One adapter piece
-2 M3 Heat Inserts
-4 M3 sockethead bolts (you can re-use your old screws/bolts)
First, snap the Creality nut into the adapter piece and secure with two bolts (these are the ones with cutaways for the socket head). Then, install the two heat inserts into the other two holes. Install into your printer with the remaining two M3 bolts and you're done!