Foot and Shoe for PCB Vise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An accessory to the original PCB Vise here, which used a wooden-base. https://www.thingiverse.com/thing:4552496
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 366
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is an accessory to the original PCB Vise here, which used a wooden-base.
https://www.thingiverse.com/thing:4552496
For this model, print the PCB Vise Foot in your preferred material, PLA recommended.
The PCB Vise Shoe is intended to be in TPU for added friction, but that is a work in progress - it does add more weight and a larger footprint to help with stability, and with the tread on the bottom it does have better friction.
Assembly is with four M3x10mm screws. You will likely need a thin flathead screwdriver to get the PCB shoe over the foot. The tolerances are very tight to keep it securely in place.
The original model this is made to work with uses M5 nuts and M5x40mm screws - I found that information hard to find.