1 / 4
Slimline Spoolholder with Pulleys/Bearings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print Print four parts overall. Each side consists of two parts facing eachother. 30% Infill and 2 bottom/toplayers…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print four parts overall. Each side consists of two parts facing eachother.
30% Infill and 2 bottom/toplayers are enough to be pretty torsion-resistant.
BOM:
8x M3x12 Screws + Nuts
4x Toothless Pulleys with 5mm Bore
Assembly
The M3 screws need to go in the holes with the spacers behind. The Bearings on the solid spacers on the top. The additional holes may be used to connect both elements of the holder with a threaded rod to prevent shifting.
3mm Bearing version will follow
Category: 3D Printer Parts