Pulley Block for IOM
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pulley blcok for IOM or similar class.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 282
- Makes
- 1
- Views
- 1,081
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
RC sailboat pulley block.
Just print 2pcs, they will fit together.
depends or your printer tolerances, you might not need even glue.
But you can apply a thin CA on holes when fitting.
Use 5x8x2,5mm Bearing with both sides sealed (marking is normally 2rs)
There is two models, other can be tied so the rope comes out from top, other is normal just straight hole.
EDIT / UPDATE..
Added a file what makes possible to contnue making multiple pulley version…
Just print in between orginal sides this added middle part, so many times you want and add bearings….
Idea came from one user, thanks for that…