Formula B1 Remix - Arduino Pro Micro

This steering wheel is a remix from this https://www.thingiverse.com/thing:4058270
I designed almost every parts in Fusion 360, the only files used from the parent are the handles.

The plate can be 3D printed but on my design it was a carbon plate, i added the .dxf. It was cut in china ( https://fr.aliexpress.com/item/4001125003413.html?spm=a2g0s.9042311.0.0.27426c37wpDmGm)

You can see my other design with detailed photos of the wheel construction ( https://www.prusaprinters.org/prints/73995-simracing-hub-gt-style ) The internal construction is the same.

You'll need: 

• M3 threaded inserts 4.2x5mm - https://www.aliexpress.com/item/4000513304304.html?spm=a2g0s.9042311.0.0.27424c4dhffj8O
  M3 screws (10-12-16 -35mm)
  M3 wahers
  M3 nuts, nylon lock if possible
   
• M5 screws to attach the wheel/hub to your FFB base. The length of the screws depends of you setup, the case measure 30 mm. 
   
• 12mm Push Button Switch - https://www.aliexpress.com/item/32896221862.html?spm=a2g0s.9042311.0.0.27426c37R7cspc
   
• 2 Micro switch for the shifters - https://www.aliexpress.com/item/1926553469.html?spm=a2g0s.9042311.0.0.27424c4dWO4Gcz
   
• 8x3mm Neodymium magnets - https://www.aliexpress.com/item/1005002209176808.html?spm=a2g0o.productlist.0.0.3a956130iYnzBO&algo_pvid=b24ac8bc-0c3f-4e0b-a47d-0dcc4cd22e31&algo_exp_id=b24ac8bc-0c3f-4e0b-a47d-0dcc4cd22e31-3&pdp_ext_f=%7B%22sku_id%22%3A%2212000019280659295%22%7D
   
• 1 Arduino Pro mini ATM32U4 5V - https://www.aliexpress.com/item/32978678381.html?spm=a2g0s.9042311.0.0.27426c37z5evzG
   
• 1 GX16 4 Pin Male-Female connector - https://www.aliexpress.com/item/32822907753.html?spm=a2g0s.9042311.0.0.27424c4dWO4Gcz
   
• For the hat switch, i'm using this file witch works perfectly: https://www.thingiverse.com/thing:3452944 , use it with the “tige.stl” and the “washer.stl”.
  you'll need 6x6x5 tact switches - https://www.aliexpress.com/item/32876497528.html?spm=a2g0o.productlist.0.0.23cd7310Vh8oAD&algo_pvid=a1d6d1cc-fc32-4273-9565-8c419cc4cd77&algo_exp_id=a1d6d1cc-fc32-4273-9565-8c419cc4cd77-10&pdp_ext_f=%7B%22sku_id%22%3A%2266461505169%22%7D
   
• A USB Male to micro USB cable - https://www.aliexpress.com/item/4001119441368.html?spm=a2g0s.9042311.0.0.27424c4dWO4Gcz -
  You'll have to solder the micro usb side to the GX16 - I'm using this order (Be aware to use the same order on the other side of the GX connector)
  1 > Red
  2 > Black
  3 > White
  4 > Green

For the Arduino, just open the Formula_B1.ino in your favorite IDE (ArduinoIDE will do just fine, eventually add the Joystick library and upload the code to your Pro Micro). You can tweek the name of the board (see how to boards.txt, the board.txt is my example).

Optional : 

I made a custom PCB, so you could send the gerber files to your pcb provider (i used jlcpcb.com) and make one. Then you'll need to solder every pins to the PCB (check the photos) and the double-end dupont line to the buttons/switches

You can download the gerber file here : https://drive.google.com/file/d/19pEmVKapCboTJWVD-D5RFSGa5o8hH_UQ/view?usp=sharing

You'll need: 

• 40 Pin 1x40 Single Row Male And Female 2.54 Breakable Pin - https://www.aliexpress.com/item/32993182990.html?spm=a2g0o.productlist.0.0.1e525e1e3FzFCP&algo_pvid=dfd6228a-4eb3-4700-87db-5f6feb7b8b92&algo_exp_id=dfd6228a-4eb3-4700-87db-5f6feb7b8b92-0&pdp_ext_f=%7B%22sku_id%22%3A%2266952136433%22%7D
   
• 2.54mm Single Row Female for the arduino pro connection to the PCB - https://www.aliexpress.com/item/4000783921467.html?spm=a2g0s.9042311.0.0.27426c37z5evzG
   
• 2P and 5P double-end Dupont Line female-Female (https://www.aliexpress.com/item/32496338704.html?spm=a2g0s.9042311.0.0.27426c37R7cspc)