1 / 2
Unifi G3/G5 Bullet Outdoor Raincover — image 1
1 / 2

Unifi G3/G5 Bullet Outdoor Raincover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Rain cover for the Ubiquiti UniFi Protect UVC-G3-Bullet + Added hole positions for G5 Bullet!

Rating
5 / 5
Likes
65
Downloads
344
Makes
1
Views
1,989
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

While the G3 Bullets are weatherproof, it can't hurt to protect them from the elements. I use this shroud to protect my G3 Bullet while captuing an outdoor timelapse of the countryside, attached to a pole on my roof.

UPDATE: Added slotted holes in base to accomodate both the G3 and G5 bullet + extended the shroud length to increase coverage of lens.

I use M3x12 bolts to connect the camera base, then ziptie everything to the pole.

Slots for zipties (4x15mm) are 21mm apart, to attach to post.
 

No supports required, print base-side-down. Recommend PETG for outdoor use, 3+ perimeters. 

Should fit any other Ubiquiti camera mount which uses 43.8mm center to center mounting holes, with a base diameter up to 66.6mm (pure coincidence) before the internal slope interferes.

 

If you need any other mounting options for the base (bolt holes, wider ziptie holes etc), let me know in the comments and I would be happy to add them for you!

Tags