1 / 3
Rokinon/Samyang 135mm f2 Ring Bracket for Astrophotography — image 1
1 / 3

Rokinon/Samyang 135mm f2 Ring Bracket for Astrophotography

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This ring system allows you to mount a Rokinon or Samyang 135mm f2 lens to a dovetail plate for use in astrophotography.

Rating
5 / 5
Likes
17
Downloads
181
Makes
2
Views
1,886
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Note: Due to differences in the shape of the Nikon vs Canon version of the lens, this file will need to be slightly modified if you wish to use this with a non-Nikon Roki/Samyang 135. Specifically, the raised lip on the inside of the rear lens ring will need to be removed in the Fusion 360 file I provided. My apologies for not knowing about this at the time. 

 

I have made a v2 of these rings with modules for geared autofocus (instead of a belted one in this v1), riser blocks, and a bunch of other improvements. If you're interested, you can check them out on agena's site or on my brand's website. But also literally zero worries if not – I'm leaving this v1 available for download in case you'd rather print that. 

 

This ring system allows you to mount a Rokinon or Samyang 135mm f2 lens to a dovetail plate for use in astrophotography. I've included both STLs and the fusion 360 files for people to edit/add on to. 

You will need:

  • A handful of M6x1mm thread, 8mm long bolts. McMaster ID: 91292A201
  • A handful of M6x1mm thread, 16mm long bolts. McMaster ID: 90128A263
  • A handful of M6x1mm thread nuts. McMaster ID: 90591A151
  • 2x M6x1mm threaded grip knobs. McMaster ID: 60765K322 
  • Adhesive-backed foam strips, ~1/32" thick, ~1/4" wide. (This goes on the inside of the rings and holds your lens more gently than the raw plastic would) McMaster ID: 93375K603

If you want to include the ZWO EAF, you will also need:

  • The autofocuser itself
  • 1x timing belt pulley for 6mm wide belt, 5mm shaft diameter. McMaster ID: 3684N11
  • 1x timing belt, 6mm wide, 350mm outer circle, 2mm pitch. McMaster ID: 7947K745
  • 2x M4x0.7mm thread, 8mm long bolts (used to screw in the EAF; can use the screws that came with it, though) McMaster ID: 92137A303

To attach a guidescope, you will also need:

Tags