1 / 3
Rokinon/Samyang 135mm f2 Ring Bracket for Astrophotography — zdjęcie 1
1 / 3

Rokinon/Samyang 135mm f2 Ring Bracket for Astrophotography

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This ring system allows you to mount a Rokinon or Samyang 135mm f2 lens to a dovetail plate for use in astrophotography.

Ocena
5 / 5
Polubienia
17
Pobrania
182
Wydruki
2
Wyświetlenia
1905
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Note: Due to differences in the shape of the Nikon vs Canon version of the lens, this file will need to be slightly modified if you wish to use this with a non-Nikon Roki/Samyang 135. Specifically, the raised lip on the inside of the rear lens ring will need to be removed in the Fusion 360 file I provided. My apologies for not knowing about this at the time. 

 

I have made a v2 of these rings with modules for geared autofocus (instead of a belted one in this v1), riser blocks, and a bunch of other improvements. If you're interested, you can check them out on agena's site or on my brand's website. But also literally zero worries if not – I'm leaving this v1 available for download in case you'd rather print that. 

 

This ring system allows you to mount a Rokinon or Samyang 135mm f2 lens to a dovetail plate for use in astrophotography. I've included both STLs and the fusion 360 files for people to edit/add on to. 

You will need:

  • A handful of M6x1mm thread, 8mm long bolts. McMaster ID: 91292A201
  • A handful of M6x1mm thread, 16mm long bolts. McMaster ID: 90128A263
  • A handful of M6x1mm thread nuts. McMaster ID: 90591A151
  • 2x M6x1mm threaded grip knobs. McMaster ID: 60765K322 
  • Adhesive-backed foam strips, ~1/32" thick, ~1/4" wide. (This goes on the inside of the rings and holds your lens more gently than the raw plastic would) McMaster ID: 93375K603

If you want to include the ZWO EAF, you will also need:

  • The autofocuser itself
  • 1x timing belt pulley for 6mm wide belt, 5mm shaft diameter. McMaster ID: 3684N11
  • 1x timing belt, 6mm wide, 350mm outer circle, 2mm pitch. McMaster ID: 7947K745
  • 2x M4x0.7mm thread, 8mm long bolts (used to screw in the EAF; can use the screws that came with it, though) McMaster ID: 92137A303

To attach a guidescope, you will also need:

Tagi