Liczymy pasujące modele…
Summary This is a (almost) fully 3d-printable kit of rings to connect the Samyang/Rokinon 135mm f/2.0 lens onto a light and small star tracker (such as the Sky Watcher Star Adventurer) or an equatorial mount (such as the Sky Watcher EQ6).…
I was looking for a good solution to make the focuser motor work with my Samyang 135mm lens on the OAT. I decided to just design my own. I think this ended up working well. There are two sets of rings, small and large. The small rings…
Note: Due to differences in the shape of the Nikon vs Canon version of the lens, this file will need to be slightly modified if you wish to use this with a non-Nikon Roki/Samyang 135. Specifically, the raised lip on the inside of the rear…
(tpu recomended, might to adjust sizing for rigid plastics) A lens cap is an essential accessory for any camera lens to protect it from dust, scratches, and other environmental elements. A 3D printed lens cap for a 14mm Rokinon lens…
A mod to Arca Swiss Plate and Top Bracket to use m4x6x6mm threaded inserts. Also focuser mount for a NEMA17 motor. Included step and fusion file for the NEMA mount since it is a complete redesign. Could be easily modified for different…
WIP Remix of arca swiss plate and top bracket for better heated insert fit. Inserts are pressed into opposite side from which they will be pulled to help avoid pullout in case you have junk inserts like me. After pressing in the heated…
Found lots of options for ZWO EAFS but no Gemini so I made one It bolts to the top of a dovetail bar. The horizontal slot for the motor screws allow tensioning of the belt. Printed out of PETG-CF with lots of walls and infill. Check .3MF…
I remixed this from something I found (though don't remember anymore where). This is a flats panel for taking flats used in astrophotography. Simply insert the 5" EL Panel (circle) into the base, glue the insert into place. The cap should…
Just a modification to my useability but thought it could be useful for others. To use, please make sure to download the other parts from danibor09's page. 80mm top/bottom knob top plate
I don't usually need to use the kase filter holder at the same time as the lens hood on my lenses. But - I use the Samyang (or Rokinon - seems to be the same lens) 135mm f2 lens for astrophotography - and in certain situations I am…
Everything is printable without supports. Print all parts labeled TPU at the end out of TPU, print the Lid_insert with 0 top layers, 1 perimeter and 10% gyroid infill. You will need 6x M3x20mm screws for the hinge and latches. If you are…
Mounting rings and a Bahtinov focusing mask designed for the Samyang 135mm f/2 ED UMC / Rokinon 135mm f/2 lens. Update June 6th, 2026: Added fron and rear top rings parts for the focuser holder Added focuser holder The Bahtinov mask…
Lens hood cap created and located here: I have produced two new versions of my Rokinon/Samyang CineAF lens hood. These models are designed with reversible bayonet mounts (one inside and one outside the hood) this allows the hood to be…
I used these clamps to mount my image-train to a dovetail, that gets mounted to my Astrophotography Goto Mount. Printed in PET-CF Part was scaled to 102% to fit Printed slow and high wall count The 3mf shows orientation and print details
This is a set of accessories for the Samyang / Rokinon 135 f/2 lens: Lens hood Bahtinov mask Flat panel for flats and darks Extra meterials: You will need some self-adhesive flocking material if you're not OK with the lens hood reflection…
This is a gridfinity bin designed to store the Samyang or Rokinon 14mm f/2.8 wide angle lens for the Nikon Z mount system. The bin is 3x4 gridfinity units and 10U high. The cutout is at 5U height. I also included a version with cutout for…
A replacement focus ring for the Rokinon 35-70 "P" lens. The fit is snug enough that friction should keep it in place, but a drop of glue would keep it from falling off on you. Tested with both PLA and ABS and the tolerances seem just…
I realized that my Rokinon / Samyang CineAF reversible lens hoods needed a cap so I designed this one. Here are the lens hoods this cap was designed for: Mine was printed in Gray Polymaker ASA on my Qidi X-Max 3. The edges on this are…
I used these clamps to mount my image-train to a dovetail, that gets mounted to my Astrophotography Goto Mount. Printed in PET-CF Part was scaled to 102% to fit Printed slow and high wall count The 3mf shows orientation and print details
Purchase the Rokinon 135mm f/2 lens - https://amzn.to/3QN8Uko Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave EDIT 1-28-25 New “generic” version of the rig included. This version removes the non-standard…
