1 / 3
Rokinon/Samyang CineAF Lens Hood Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap for my Rokinon/Samyang CineAF Lens Hoods
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Standard Digital File License
I realized that my Rokinon / Samyang CineAF reversible lens hoods needed a cap so I designed this one.
Here are the lens hoods this cap was designed for:
Mine was printed in Gray Polymaker ASA on my Qidi X-Max 3.
The edges on this are pretty sharp, but that is on purpose so that when you are putting it on or taking it off inside the lens hood you can get a good grip on it.