1 / 2
Rokinon 14mm f/2.8 Nikon Z mount lens bin for gridfinity — zdjęcie 1
1 / 2

Rokinon 14mm f/2.8 Nikon Z mount lens bin for gridfinity

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gridfinity bin for organizing photography equipment like Rokinon/Samyang 14mm f/2.8 wide angle lens for Nikon Z mount

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a gridfinity bin designed to store the Samyang or Rokinon 14mm f/2.8 wide angle lens for the Nikon Z mount system. The bin is 3x4 gridfinity units and 10U high. The cutout is at 5U height.

I also included a version with cutout for finger holes to grab the lens for ease of use. Although I found that removing the lens from the version without the cutout was not challenging either.

The lens shape was designed in Tinkercad using cylinders and cones for the four different diameter sections and the transitions between them. I then used gridfinity generator to create a gridfinity bin with the shape of the lens cut out. The .stl file with the shape cut out was further modified in tinkercad to add the finger cutout.

The .stl files for the bins were repaired using the free online stl repair tool at formware.co to avoid non-manifold edges

This is my second such design, the first one that hasn't been shared yet was for the Nikon Z mount 100-400mm f4.5-5.6 VR S telephoto zoom lens. My measurements and subsequent prototype bins for that lens didn't prove to be accurate or satisfactory. But if there is interest in it, I will be happy to share the files.

Tagi