1 / 4
Elegoo Neptune 4 (Pro) ADXL345 Extruder Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small and secure ADXL345 extruder mount designed for the Elegoo Neptune 4 Pro.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 189
- Makes
- 1
- Views
- 2,492
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An extruder mount for the ADXL345 inspired by @FLYNINDUSTRIES's bed clamp mount.
This mount was designed for the Neptune 4 Pro but may work on other models.
If this works on your printer using POM V-guide rails please let me know!
This leverages heat set inserts to ensure the ADXL345 stays secured and mounts to an available slot on the extruder itself
Bill of Materials:
- 2x - Heat Set Inserts (M3x5x4)
- 3x - M3 4mm cap head bolts for upper mounting the ADXL345 to the print and the print to the extruder
Print Settings:
- 4 Perimeters/walls
- 15% infill
- 0.2mm layer height
- 0.4mm line width
- 5 top and bottom layers
- Parts are pre oriented in the correct position for printing
- Supports required only for the brace, please refer to the image below
