Multiboard to HSW Honeycomb Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connect HSW models to Multiboard with this model
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 668
- Makes
- 5
- Views
- 3,032
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're like me, I have tons of HSW models with numerous types of connections. I like the new multiboard (MB), but I do not like how the connections do not match that of the HSW wall except for the “peg” connection.
I worked with the MB “snap” and matched it up with the HSW wall so that you can use your HSW models with the MB wall. I added filets to the sharp edges of the HSW part so that it's easier to print and it will allow for other MB connectors to not interfere with each other.
I printed this with the MB side on the build plate OPPOSITE that is showing on the STL file. Print the way my closeup picture shows. I had no problems with the bridging with Overture PETG on an Ender 3 Neo.
For me:
There is no need for supports if your printer can handle the bridging
3 walls
%15 infill
3 top / bottom layers