Multiboard to HSW Honeycomb Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect HSW models to Multiboard with this model
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 668
- Wydruki
- 5
- Wyświetlenia
- 3032
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're like me, I have tons of HSW models with numerous types of connections. I like the new multiboard (MB), but I do not like how the connections do not match that of the HSW wall except for the “peg” connection.
I worked with the MB “snap” and matched it up with the HSW wall so that you can use your HSW models with the MB wall. I added filets to the sharp edges of the HSW part so that it's easier to print and it will allow for other MB connectors to not interfere with each other.
I printed this with the MB side on the build plate OPPOSITE that is showing on the STL file. Print the way my closeup picture shows. I had no problems with the bridging with Overture PETG on an Ender 3 Neo.
For me:
There is no need for supports if your printer can handle the bridging
3 walls
%15 infill
3 top / bottom layers