1 / 3
AirTag clip for Peak Design Anchor Link System
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compatible with (I think) all products using V4 Anchor Link System from Peak Design
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 153
- Makes
- 1
- Views
- 1,634
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Files
- peakDesignAirTagV2 [2024-02-01] - Recommended! Minor alterations to geometry around AirTag to allow easier insertion/removal. Still a very secure hold!
- peakDesignAirTag [2024-01-29]: Original file (shown in video). AirTag is difficult to insert and even more difficult to remove
Printing
Requires supports! I suggest 0.1mm layer height and PETG (or other robust material) for aesthetics and durability, respectively. It is fully functional at 0.2mm in PLA and PETG.
[Printables | Makerworld ]
Instructions
Thoroughly remove support material. The tolerances are tight and small remnants can interfere with the function of the clip. AirTag insertion requires quite a bit of force!
Notes
- Designed to allow full functionality of the PD Anchor Link System
- Tested on Cuff and the Anchors Links included with Everyday Backpack Zip
- Should work (but untested) with Leash & Slide camera straps, but NOT with Slide Lite as it has a wider base. I will consider supporting Slide Lite if there's interest!