SLCMAD Mosquito Trap V4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated design from the following research project:…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 0
- Views
- 1,291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Updated design from the following research project:
https://journals.plos.org/plosntds/article/file?id=10.1371/journal.pntd.0011899&type=printable
Assembled with the following parts:
Body screws: https://www.amazon.com/gp/product/B09MCWFV6V?th=1
Brass inserts: https://www.amazon.com/gp/product/B07CJ7PSS9?th=1
Airstones: https://www.amazon.com/gp/product/B01CQ9L9I4/
Airstone tubing: https://www.amazon.com/gp/product/B0774BFZG4/
Motor mounting screws: https://www.amazon.com/gp/product/B01B1ODIR0/
Wiring : https://www.amazon.com/gp/product/B071HG6WGM?th=1
Heatshrink: https://www.amazon.com/gp/product/B09NWDNQM5/ https://www.amazon.com/gp/product/B08W8K32VV/?th=1
Alligator clips: https://www.amazon.com/gp/product/B088WPG682?th=1
Elegoo PLA Plus: https://www.amazon.com/gp/product/B0C7GDB9GQ/?th=1
Carabiners: https://www.amazon.com/gp/product/B09HQHTLHB/?th=1
Eyebolts: https://www.mcmaster.com/catalog/129/1784/9489T112
Locknuts: https://www.mcmaster.com/catalog/129/3594/90631A009
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Max
Rafts:
Doesn't Matter
Supports:
Yes
Filament: Elegoo PLA+ Black
The motor bracket used in this trap is a slightly resized version of this part:
https://www.printables.com/model/340708-dmvcd-motor-bracket/files
Thanks to Mark Nakata for the original design. Depending on your filament/print settings the motor bracket may need to be sized up to 101 or 102% for a snug fit.