SLCMAD Mosquito Trap V4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated design from the following research project:…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 1291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Updated design from the following research project:
https://journals.plos.org/plosntds/article/file?id=10.1371/journal.pntd.0011899&type=printable
Assembled with the following parts:
Body screws: https://www.amazon.com/gp/product/B09MCWFV6V?th=1
Brass inserts: https://www.amazon.com/gp/product/B07CJ7PSS9?th=1
Airstones: https://www.amazon.com/gp/product/B01CQ9L9I4/
Airstone tubing: https://www.amazon.com/gp/product/B0774BFZG4/
Motor mounting screws: https://www.amazon.com/gp/product/B01B1ODIR0/
Wiring : https://www.amazon.com/gp/product/B071HG6WGM?th=1
Heatshrink: https://www.amazon.com/gp/product/B09NWDNQM5/ https://www.amazon.com/gp/product/B08W8K32VV/?th=1
Alligator clips: https://www.amazon.com/gp/product/B088WPG682?th=1
Elegoo PLA Plus: https://www.amazon.com/gp/product/B0C7GDB9GQ/?th=1
Carabiners: https://www.amazon.com/gp/product/B09HQHTLHB/?th=1
Eyebolts: https://www.mcmaster.com/catalog/129/1784/9489T112
Locknuts: https://www.mcmaster.com/catalog/129/3594/90631A009
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Max
Rafts:
Doesn't Matter
Supports:
Yes
Filament: Elegoo PLA+ Black
The motor bracket used in this trap is a slightly resized version of this part:
https://www.printables.com/model/340708-dmvcd-motor-bracket/files
Thanks to Mark Nakata for the original design. Depending on your filament/print settings the motor bracket may need to be sized up to 101 or 102% for a snug fit.