1 / 1
Spool spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple spacer for using between spools in a dry box.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 1
- Views
- 225
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
These spacers are intended for use with a 10mm (3/8") axel, which seems to be common. In the dry boxes I've made, four spools fit, but, are very loose. These spacers allow for room between spools, and have an option to use a 3mmx16mm set screw to hold them in place. The set screws should really only be needed on the ends where the space between the spool and the box is greater than 10mm.
You can print using any material you like; I use ASA as the dry boxes I have can be heated.
I've included the FreeCAD file so you can modify if you like.