1968-1975 MG Midget Steering Column Cowl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Steering Column Cowl/Surround/Cover for 1968-1975 MG Midget. Will also fit later Midgets and some MGB's I believe.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 96
- Makes
- 1
- Views
- 629
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a recreation of the steering column cowl for a 1968-1975 MG Midget, which seem to be pretty hard to find these days. I based this model off of the cowl that I copied from my 1978. I referenced pictures of the earlier cowls and made the needed changes.
These should also fit ‘76-’80 Midgets, but the factory cowls for those years have auxiliary switch locations under each of the turn signal & wiper stalks.
You will need (2) #10-32 heat set inserts, which get inserted into the right/ignition half of the cowl. To mount the halves to the steering column, you will need (2) #10-32 x 1" & (2) #10-24 x 1/2" long panhead machine screws.
The (4) locating pins get inserted into their respective locations, as seen in the pictures. I used popsicle stick pieces for prototyping.