Counting matching models…
Clamp on Windshield Phone Holder for MGB or MG Midget NOTE: PRINT THE GoPro VERSION. It's just better. Also, I completely re-invented this mount from the ground up and that version is available here . I needed a special mount to secure my…
Organizer for Kobalt midget wrench set. Print instructions Organizer for Kobalt midget wrench set.
This is an upgrade & slight redesign of the center radio console found in MG Midgets/Austin Healey Sprites. It is roughly 2½"/64mm narrower than the factory metal console, for some added knee room. It is also about ¼"/6mm shorter, so…
This is a recreation of the steering column cowl from my 1978 MG Midget, which seem to be pretty hard to find these days. The print shown in the pictures is the V1 prototype. The one for download is V2 with some fixes and and some changes…
These fill in the empty space below the taillights that is left when the rubber bumpers are removed. For assembly & mounting you will need (8) #10x1" sheet metal screws. Part “A” is the same for both sides. Part “B” is directional.
Wall art made from a frontal image of a MKIII MG Midget
This is a recreation of the steering column cowl for a 1968-1975 MG Midget, which seem to be pretty hard to find these days. I based this model off of the cowl that I copied from my 1978. I referenced pictures of the earlier cowls and…
These snuggly snap into the lower cowl cutouts. Each side is identical, so you just need to print (2) of them. Print them in either ABS/ASA. I painted mine silver to better match my Ashley Hinton custom stainless grille.
If you don't have a locking choke knob on your Austin Healey Sprite, or MG Midget, or other vintage car using this arrangement, you might be using a clothespin to hold the choke in position. This simple clip is slightly more elegant. One…
Magsafe mount for windshield on MG Midget or MGB (with windshield post) Diameter of groove for windshield post is 4.2mm Print with supports Used m4 lock nuts to mount. M4 bolt is 16mm long
This is a custom high flow intake that I've designed for the 1500 MG Midgets & Triumph Spitfires. It has the same overall dimensions as the stock intake “log”, but it should flow a lot more efficiently. It also has larger diameter intake…
I created this drink holder from scratch in. It has a base that slides under the carpet or floormat on the passanger side.
These are vent cover that I designed to make the footwell vents in my Midget easily accessible, as I was tired of fumbling around at traffic lights, trying to open the vent covers. These make opening/closing the vents easy, with the 10mm…
These just snuggly snap into the turn signal cutouts in the fender. Each use (3) of the Ø3/4" LEDs that just slip into rubber grommets. Three files are available. One is as shown. One is solid, but has the holes for the LEDs. The last is…
These just snap into the turn signal cutouts in the front bumpers of 1500 Midgets. They use a 2" round beehive style light. There are two versions: The one shown clamps the light into a bracket using a backer plate & (2) #6x1/4"(M3x8mm)…
Gridfinity - Craftsman Midget Wrenches 942319 - SAE
3d Printable replacement for the interior door pull screw covers for an MG Midget. I recommend printing it in either ABS, or ASA, because the part does need to be somewhat flexible for installing it. You could try it in TPU(which would…
3d Printable Replacement for the MG Midget Window Crank Escutcheon. I recommend printing it in either ABS or ASA for longevity.
This mount uses the top two license plate mounting bolts to hold a 3rd brake light. The bracket is mirrored, with an MG logo on one side, so if you don't want to see the logo, just mount it facing down. For the LED light, I bought a set…
This is a copy of the rubber visor retainer from my ‘78 MG Midget. I haven’t printed it, because I haven't needed it. This is just a copy of the original for others to use. The factory retainer is rubber, so I would print it out of TPU,…
This 3D-printed replacement clip is designed specifically for the sun visor holder in MG Midget models, offering a reliable and secure fit to keep your sun visor in place. With its sturdy construction, this clip restores the original…
This is a raw 3D scan of a transmission from a 1970s MG Midget with a 1275 cc engine. This is a perfect starting point to use as a reference for transmission swaps or conversions. The transmission scanned was in working order. File size…
This will adapt a Holley Sniper 1100 to the 1500's factory ZS intake. The adapter also has a built-in 3° taper that will mount the Sniper at the slight upward angle. This solves any issues with the fuel pooling in the throttlebody and…
This is a copy of the part of the luggage rack mount which is plastic. It's the piece that mounts under the chrome caps and locks the luggage rack into position. I decided to put a decent fillet on the base of the center post for some…
Designed to help extend the bonnet strut on an MG Midget to prop the bonnet open wider.
This is a set of cup holders I designed to mount where the ashtray used to be in an MG midget. It should fit in any model of the MG midget. I have a 1975, but I believe that the center column is the same for all years. I mounted mine with…
Designed to help extend the bonnet strut on an MG Midget to prop the bonnet open wider.
Clamp on Windshield Phone Holder for MGB or MG Midget NOTE: PRINT THE GoPro VERSION. It's just better. Also, I completely re-invented this mount from the ground up and that version is available here . I needed a special mount to secure my…
These are vent cover that I designed to make the footwell vents in my Midget easily accessible, as I was tired of fumbling around at traffic lights, trying to open the vent covers. These make opening/closing the vents easy, with the 10mm…
This is a spring seat for MG Midget and Austin Healey Sprites that raises the front ride height about 10mm. Also adds some spring isolation for improved ride quality. Fits into the top of the spring and onto the tapered spring locator in…
Gridfinity - Craftsman Midget Wrenches 942339 - Metric
Simple rack for organizing metric and SAE sets of Craftsman's midget wrench sets.
I've copied the thermostat housing off on my 1978 MG Midget, since these seem to be hard to come by these days. I would use a service like Craftcloud in order to get it SLM printed out of aluminum. The fill hole in the top is 0.748"Ø, so…
Holds the following midget wrench's from Craftsman or similar. Make sure to print the holder on its side for maximum strength. Fits Metric: -4mm -4.5mm -5mm -5.5mm -6mm -7mm -8mm -9mm -10mm -11mm OR Fits SAE: -5/32" -3/16" -13/64" -7/32"…
End caps for the late model MG Midget frame rail ends when they are cut back as part of a rubber bumper delete update. Print in PETG or ABS with 50% infill and no supports. Enjoy!
SAE/Metric Midget Wrench Holder for Craftsman Midget Wrenches. Added a gridfinity base and box to keep them contained.
MG Midget - Hazard Switch Light Retainer Bracket. Copied from a factory piece, but unfortunately I'm unable to properly test it. It should work though.
I printed 3D Printy's version out but soon realized the tolerances are crazy small and inserting the magnets is near impossible and putting on the case was very hard in the end I decided to reverse engineer it to make it smoother.…
Print (4) of these and then slide them onto the hood hinges as shown in the pictures. These will hold the hood open after you disconnect the prop rod, which makes removing/installing the hood quite a bit easier. I recommend printing them…
This is a copy of a sun visor mount off of my 1978 Midget. I know some versions of the mounts are angled, but these ones are straight. I'm not sure which model years has the angled mounts vs straight mounts though. I haven't printed this,…
This is the angled version of an MG Midget sun visor mount. I do not have an original one to measure, so I took the straight version that I copied from my car and modified it. Using an angle finder in my car, and by referencing a picture…
