1 / 5
Jung 245.07 spare part dimmer cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the button cover of an Jung dimmer switch
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 29
- Makes
- 0
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The part can be used on a Jung 245.07 dimmer if the original bracket for the cover is broken.
Other dimmers and covers will probably also fit.
I printed it for better stability, as shown in the screenshot from the slicer. The adhesion was sufficient for me.
I drilled off the flanges on the dimmer itself so that the defective part can be removed. I then fixed the printed new one in place with a few drops of superglue.