Tape Measure Stopper for Lufkin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The slide stopper for my Lufkin Measure
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
My slider no longer held the tape measure in place anymore so took out the broken one and copied and printed it.
May it help you.
Print settings
ABS
.25 layer height
5 walls
5 top/bottom
50% gyroid infill
Brim on
Supports on, zig zag 30% density, .2m top/bottom support distance
Print speed 40ms
Fans on 60% at layer 10 (I have an enclosure I let preheat before I start the actual print) I know people say not use use fans, for me it works, do what works for you.
Extruder temp 245
Bed temp 100
I'm sure PLA, PETG, would work just as well, I went with ABS since I'm comfortable with it(and that's what I had loaded and was too lazy to swap filament)