Exposure Aero Light Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalism clip-in light mount for EXPOSURE brand light. Designed for standard bike computer mount.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 64
- Makes
- 0
- Views
- 676
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A minimalism clip-in light mount for EXPOSURE Trace (or same OD) light. It is designed with a slightly tilted down angle which fit with a horizontal leveled front reach bike computer mount.
Compatibility:
Standard bike computer out-front mount with 20mm distance between m3 screw holes. Normally any mount with a removable GoPro mount is compatible.
Print Instruction:
Recommend to print with PLA Tough or PLA professional with a thicker wall setting. You should also print it vertically for better structural strength. The layer texture from the printing process also a perfect grip to the CNC surface of the Exposure Light. Tree-type support also recommended for a better printing quality, no brim needed.
Installation:
For installation, you'll need two standard m3*5mm socket head screws. First just push the screws into the holes on the side. Then you can use Allen wrench with round head to screw in. It will be a little bit tricky at the beginning with the angle, but you can get there I promise, pro tip is don't push to hard when screwing.
I have tested this design for a while on multiple terrains like city commuting/technical gravel/single track. It holds well and so far never drop the light.
And it just makes things more LIGHTWEIGHT & AERODYNAMIC!!!
Release Note:
The model has been updated with more spaces for Allen wrench to screw in. Please download the Updated file (02/08/2024)