Fume extractor (only 3 parts)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.67 – €2.04 net (excluding VAT)
For file: Front_0.2mm_PETG_MINI_1h54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.86 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 1.9 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Table fume extractor for soldering.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 54
- Makes
- 0
- Views
- 587
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Table fume extractor for soldering. Three print parts only (front, back, wall).
List of parts
- Carbon filter (105 x 105 mm)
- 12V Fan (93 x 93 mm)
- Switch (d=20 mm)
- DC connector (d=18 mm)
- M3 x 40 mm screws with head (4x)
- M3 x Hex nuts (min 4x)
- M3 Knurled nuts (4x)
Assembly
- Front part - sunk the Knurled nuts (opt.: fix it with glue).
- Back part - place the Fan, screws it with Hex nuts, place the Carbon filter.
- Wall part - place the Switch and DC connector, solder the cables.
- Place the Wall part on the Back part, close it with Front part and screws it together.
Easy to print. No supports needed.
I used PETG (White, Black)