ESPHome LED status display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement of HM-OU-LED16 with 16 LEDs by ESPHome device
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 79
- Makes
- 2
- Views
- 844
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I used a Homatic HM-OU-LED16 display to show which windows in the house are open and some some other infos. This works since years very good, leaving the house a red LED shows that I missed to close a window or tat it is time tu put the rubbish bin to the street.
Since some month I got more and mor trouble with wrong data shown on this display. As I was not able to solve the problems, I decided to bild up sometthing new.
Base are:
- wo NeoPixel sticks with 8 LEDs
- one ESP32 NodeMCU
8 LEDs on both sides, in the middle enough space for a sheet of paper to print out for what each LED stands.
Statusanzeige v44:
- Fusion 360 model of the complete display
This are the parts of the housing:
ESP32_Boden:
- The ESP32 NodeMCU fit inside with the bottom up
- can be screwed to “FrontHinten”
ESP32_Top:
- The cover of the ESP32 can be slided over the ESP 32
- Can be screwed from the bottom to “ESP32_Boden”
FrontHinten :
- the two NeoPixel sticks fit in the back of the part.
- I soldered pin headers to the NeoPixel sticks to connect them easy
HaubeKomplett:
- The front housing
- A 2mm acryl glass is used to prevent the paper from getting dirty,
it fits inside (see “Plexiglas”)
HaubeHinten:
- The back of the housing with 4 screws
All parts can be printed without brim or supports.
I did it with a MK3
dl-status-anzeige.zip :
- YAML file for ESPhome
- done in that way that you can address each single LED, set the color and the brightness
Example automation which switches one LED depending of the state of a window group.
LEDs will be addressed by “my_led_id”
alias: status_led_AZ
description: Gruppe der Fenster im Arbeitszimmer
trigger:
- platform: state
entity_id:
- binary_sensor.az_fenster_group
- input_number.dl_status_led_brightness
- platform: time_pattern
minutes: "0"
- platform: numeric_state
entity_id:
- sensor.dl_status_anzeige_uptime
below: 0.5
condition: []
action:
- service: esphome.dl_status_anzeige_change_dl_led
data:
my_led_id: 15
my_red: "{{ 1 if is_state('binary_sensor.az_fenster_group','on') else 0 }}"
my_green: 0
my_blue: 0
my_brightness: "{{ float(states('input_number.dl_status_led_brightness')) }}"
mode: queued
max: 3