1 / 1
External 120mm Fan and HEPA Filter Mount for SUMO Enclosure — image 1

External 120mm Fan and HEPA Filter Mount for SUMO Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Assembly to mount a 120mm external fan and HEPA filter to the SUMO Enclosure.

Rating
4 / 5
Likes
14
Downloads
56
Makes
1
Views
797
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

This design was created to minimize contact with the PRUSA XL 5T cable/PTFE bundles when mounting a 120 mm fan and HEPA filter on the SUMO enclosure. The bracket allows the fan, filter, and fan cable to be installed outside the enclosure. 

Assembly was printed using PETG and the default .25mm Structural Input Shaping profiles in PRUSA Slicer. The model does not require supports with the correct orientation during slicing.

A Noctura NF-P12 Redux-1700 PWM fan and Fette Filter - Air Purifier True HEPA Replacement Filter were used.

The frame is mounted to the SUMO enclosure using the hole filler from the original model and spare hardware included with the enclosure. The fan is mounted using the screws supplied with the fan. The filter enclosure should slide snuggly into the mounting frame.

The assembly also works with the @3DSourcerer 120mm fan guard model to prevent the bundles from contacting the fan. 

Tags