1 / 2
Tool to replace filter of Drufi DFR
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To replace the filter of my water filter Drufi DFR, I have designed my own tool and did not buy the original tool.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 55
- Makes
- 0
- Views
- 825
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
To use the printed tool, I recommend a pipe or a shaft with a diameter of 16mm out of stainless steel or any other metal material.
Part list:
- printed ring | quantity: 1
- printed fixing plate | quantity: 2
- pipe or rod ⌀16mm | length: ≥200mm
- cylinder head screws M4x25 | quantity: 4
- hexagon nuts M4 | quantity: 4
Print instruction:
- material: ASA or PETG
- supports: can be printed without support
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: recommended
Assembly instruction:
- deburr parts if needed
- add hexagon nuts M4 (3x) to fixing plates
- insert pipe to ring
- assemble fixing plates by using cylinder screws M4x25 (4x)