1 / 2
Irregular Gridfinity Storage Bin for Husky Workbenches
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Irregular sized gridfinity bins to fill the space of a Husky workbench
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 33
- Makes
- 0
- Views
- 472
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I wanted to maximize the storage space the Husky workbench drawers. Using the baseplates by 64bitcube there was still a little bit of room at the rear of the drawers. These bins will make use of that space, a little over ½ of a standard gridfinity bin.
Features
- These are 1 x 1sh x 6 bins. They may require modifying the drawers of your workbench to fit the height. It seems a lot of these workbenches have the front of the drawer deeper than the rear.
- They have no base on the partial section. This will require supports but will allow you to easily insert and remove the bin by only removing the bin in front if it first.
- The label area has been extended so you use a 12mm/0.47" tape and still read it while in the drawer.
If there are other sizes of bins you'd like please leave a comment and I'll try to add them.