A1 mini Z linear rail lube oil reservoir
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a drop in replacement for the original part that allows collection of the extra lubricating oil from linear rail
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 97
- Makes
- 0
- Views
- 1,085
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
While lubricating the Z linear rail on the A1 Mini some time ago I discovered a serious problem. The oil eventually ended in the components parts due to its viscosity and also gravity.
While I know most of the lubricating oils are not electro conductive I really don't think having the motherboard soaked in lubricating oil is anything but a dangerous situation to be in.
Lubrication became frustrating for me so I started to design something that would fix my problem.
I remodeled the bottom part and attached a reservoir system to it and a little bit of sponge.
Notes:
- this is not endorsed by Bambu Lab, it's just my creation, in my opinion it does not imply any risks to your printer but if anything happens I am not responsible for the damages.
- I use a little bit of sponge to guide the oil to the funnel
- I use a syringe to take the extra lubricating oil from the reservoir
- filament used is Bambu Lab Matte Marine Blue (11600)
