1 / 3
Hex Hygrometer Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple bracket for your spare hygrometers!
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 348
- Makes
- 9
- Views
- 782
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a handful of spare Weewooday brand hygrometers (bought on Amazon) that I decided to put to use to monitor conditions in my print room. They pop right into the bracket and are indexed by slots in the back to prevent them from rotating.
Parameters:
- Printed face-down
- 0.4mm nozzle, 0.2mm layers, 2 walls
- 20% gyroid infill
- Printed in Flashforge PLA, but should work with anything - consider PETG or other temperature-resistant materials for higher-temperature applications.
- no adhesion, no supports.