1 / 5
Waterrower VR3 Pulley
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hello, This is a replacement part for a WATERROWER VR3 It's the top most pulley indicated in red on the printscreen.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement part for a WATERROWER VR3
It's the top most pulley indicated in red on the printscreen.
I printed this in PLA
10 walls
5 top/bottom layers
50% infill heaxgon
I had to do some post process with sandpaper to have it all smooth.
Pressed in the bearings with a benchvice and some wooden blocks, 1 at a time.
You don't need to dismantle the rower if you put a philipsbit in a 7mm socket for the ratchet (see last printscreen)