"Yet another Nextruder Nozzle Box" ³ Yet another Nextruder Nozzle Box
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.00 – €2.45 net (excluding VAT)
For file: Nozzleholders³_PETG_MK4IS_1h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.23 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 1.95 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simplified and combined version of the Nextruder Nozzle Box.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 63
- Makes
- 5
- Views
- 335
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
When looking for a sleek, simple, logically way of storing Nextruder nozzles many of the printables are so close to fit my desire for what i'm looking for.
That was:
- no chance of flying nozzles when bumping into them when they are hanging on the side of the enclosure.
- “Protected from the elements” when longer periods of time not printing with one of the nozzles i wanted close to no chance of dust or cat hair collecting in/on the nozzle.
- Easy to print variant, no tricks with "pressed in text" and upside down printing, with larger nozzles that is a pain sometimes, also, it's even pain to print right-side-up when printing with larger diameter nozzles.
- No need for printing in 4+ differant colors to get a clear differance in the nozzle sizing, hence why the standing out text on top of the models.
This nozzlebox fits 5 nozzleholders/nozzles.
Recommanded print settings:
- 0.4mm+ nozzle
- 3 perimeters (This makes the sliding edges strong)
- 3 top and 3 bottom solid layers
- 20% or less gyroid infill
- 0.15mm Quality layer height for the nozzle holders themselves because of the text and 0.30mm layer height for the box
- Supports: OPTIONAL, 2 small ridges on the box part has a 90 degree overhang for 1 or 2 lines, it can be cut afterwards, but if that bothers you supports can be turned on.
- Every other setting is the stock Prusament PETG setting in 0.4mm nozzle config